BorMann BPG9000 Manual page 6

10.
10.
8
B C
A
Adjusting the spray gun
Choice of spraying effects
A =vertical flat jet
For horizontal surfaces
B =horizontal jet
For vertical surfaces.
C =round jet
For corners and edges and other badly accessible places
Adjusting the required spray effect
With the union nut (3) loosed, turn air cap (1) to the required spray pattern.
Caution:
Never open trigger when making adjustments on the air cap.
Adjusting the amount of material
Adjust the amount of material by turning the adjustment screw.
+Turn to the right –more material
-Turn to the left -less material
Spraying technique
The spraying result depends considerably on how smooth and clean the surface is before spraying begins. For this reason the
surface should be carefully prepared and kept free of dust.
Surfaces not to be sprayed should be covered with sticky tape and newspaper.
Cover threads and the like on the object to be sprayed.
It is advisable to carry out a trial spraying onto cardboard or a similar surface to find the most suitable spray gun adjustments.
cm
6
www.BormannTools.com