Checking the engine ECM
1. Measure:
• Engine ECM output peak voltage
Out of specification Checking the pulser
coil.
Engine ECM output peak voltage
(reference data)
#1: Black/Orange (B/Or)–Black (B)
#2: Black/White (B/W)–Black (B)
#3: Black/Yellow (B/Y)–Black (B)
r/min
DC V
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the ignition coil coupler "a".
b. Connect the special service tool "1".
c. While cranking the engine, measure the
peak voltage.
R/Y
B/Or
R/Y
B/W
B/Y
a
1
Unloaded
Cranking
100.0
Or
1
a
d. Disconnect the special service tool.
e. Connect the ignition coil coupler.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
Checking the ignition coil
1. Measure:
• Ignition coil resistance
Out of specification Replace.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Disconnect the ignition coil couplers.
a
b. Disconnect the spark plug caps from the
spark plugs.
c. Remove the spark plug caps from the igni-
tion coil.
d. Measure the ignition coil resistance.
B
A. Primary coil
B. Secondary coil
e. Install the spark plug caps to the ignition
coil.
f.
Connect the spark plug caps and ignition
coil couplers.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
5-29
Ignition unit and component
Test harness SM6195043
90890-06861
Test harness SM6195043
YB-06861
Primary coil resistance
0.180–0.240
Secondary coil resistance
3.26–4.88 k
B
A
B/Or
B/W
B/Y