Technical Specifications - Dejero EnGo 3x Manual

www.dejero.com
Problem Error /
warning
number
Latency is being Warning 120
adjusted to
optimize the
requested
operation. This
message will
automatically clear
when the latency
adjustment has
completed.
SSL Handshake Warning 121
failed
Requested latency Error 125
setting is too low
Hardware failure Error 200
Software failure Error 201

Technical specifications

Video
Resolutions 1080p 23.98/25/29.97/30/50/59.94/60 (3G-SDI Level-A), 1080i
25/29.97/30, 720p 50/59.94/60, 576i 25, 480i 29.97
Encoding H.264 AVC and H.265 HEVC, adaptive encoding
Inputs 3G/HD/SD-SDI, HDMI 1.0
67 | Dejero EnGo 3x User Guide
Description
The CellSat service
requires a minimum latency
of 1.5 seconds. The device
is adjusting the latency from
a lower level.
The SSL handshake failed
due to poor network
conditions.
The assigned receiver is
not capable of a latency of
less than 0.8 seconds.
The input device has
malfunctioned.
The software stopped
unexpectedly and was
restarted automatically.
Solution
Wait for the device to adjust the latency.
Wait for network conditions to improve
and try again.
Assign this source to a receiver with a
compatible latency setting or contact
Dejero Support for assistance.
Contact Dejero Support.
Contact Dejero Support.