Connecting To The Engo - Dejero EnGo 3x Manual

www.dejero.com
● Live and Recording: Transmit live while also recording high-quality video to use later. Use
this mode when network bandwidth is limited but you still need to broadcast live.
● Clip or File Transfer: Quickly transfer photos, scripts, graphics, or edited video packages to
the Dejero receivers using the blended network connectivity.
● Record and Auto Transfer: Record a clip and transfer it to the receiver simultaneously. Use
this mode when you need to have the clip available on the receiver quickly.
● Wi-Fi Hotspot: Access the internet over a single network connection, preserving the
remaining connections for video.
● GateWay Mode: Use all available connections for internet access or to provide increased
capacity for data-intensive applications.
Note: Audio and video data transmitted by the EnGo 3x can be encrypted using AES 256
encryption. For more information, see "Enabling stream encryption" on page .

Connecting to the EnGo

You can use the connection ports on either side of the EnGo to connect video and audio,
Ethernet, IFB, or Intercom. You can also use the USB ports on the EnGo.
Note: By default, Ethernet port 1 on the EnGo 3x is configured as a WAN port and Ethernet port 2
is configured as a LAN port. To configure both Ethernet ports as WAN ports, contact Dejero
Support.
14 | Dejero EnGo 3x User Guide