Dejero EnGo 3x Manual page 33

www.dejero.com
Note: If you turn on Auto Start, the live stream starts when the transmitter detects video. If the live
stream is stopped manually, Auto Start does not start again until you turn off and turn on EnGo
again.
Configure the connection type
You can set the type of connection to use when transmitting data.
1. On the Preview screen, select
2. Select More.
3. Select Settings.
4. Select Connections.
5. Select Connection Types.
6. Select a connection type: All, Ethernet, or Modems.
Connection type settings
Setting
All
Ethernet
Modems
Configure the connection settings
You can set the type of connection to use for transmitting data.
1. On the Preview screen, select
2. Select More.
3. Select Settings.
4. Select Connections.
33 | Dejero EnGo 3x User Guide
.
Description
The transmitter sends data through all available connections, including
cellular, Ethernet, and Wi-Fi. The transmitter uses only the connections
that are available. If multiple connections are available, the transmitter
uses all connection types simultaneously.
The transmitter sends data over Ethernet, Wi-Fi, or both. If you select this
option but do not have an Ethernet cable connected or a Wi-Fi
connection configured, an error appears on the screen.
The transmitter sends data over the modem connections only. Use this
mode when your Wi-Fi or Ethernet connection is poor, or with high usage
by others resulting in low bandwidth.
.