Dejero EnGo 3x Manual page 29

www.dejero.com
Configure the audio input
By default, EnGo uses two audio channels. To add more audio channels and maintain video
quality, you will require additional data. Any additional data that you use for additional audio
channels is deducted from your data plan allotment.
EnGo supports 2-, 4- or 8--channel audio. To add more audio channels and maintain video
quality, you will require additional data.
Note: 4- or 8-channel audio is only available with the SDI input.
1. On the Preview screen, select
2. Select More.
3. Select Input.
4. Select Audio Input.
5. Select the number of audio channels.
Switch between balanced and unbalanced IFB audio output
By default, EnGo uses a balanced audio output for IFB. You can switch to an unbalanced
output.
1. On the Preview screen, select
2. Select Audio Comms.
3. Select the IFB audio output state.
Configure the video loss setting
You can configure what appears on the screen if the video is lost during a transmission.
1. On the Preview screen, select
2. Select More.
3. Select Settings.
4. Select Input.
5. Select Video Loss.
6. Set the video loss setting to Black Screen or Last Frame.
Configure the Live Resolution setting
Live resolution is the resolution of the video, as transmitted over-the-air when broadcasting. It is
independent of the transmitter input and receiver output resolutions.
29 | Dejero EnGo 3x User Guide
.
.
.