Dejero EnGo 3x Manual page 34

www.dejero.com
5. Select Preferred Connection.
6. Select a connection setting: Automatic, Ethernet, or Cellular.
Connection Preference settings
Setting
Automatic
Cellular
Ethernet
Define the SIM set
The EnGo can use different SIMs based on the region that you are in. If you are using regional
SIMs, you must select a SIM set.
Note: Primary refers to the set of SIM cards that might be included inside the EnGo. Secondary
refers to any auxiliary SIM cards that are in the user-accessible SIM module.
1. On the Preview screen, select
2. Select More.
3. Select Settings.
4. Select Connections.
5. Select SIM Set.
6. Depending on your geographic location, select Primary or Secondary.
Note: When you define a SIM set, the setting applies when using the EnGo as a hotspot or when
using the EnGo in GateWay Mode.
34 | Dejero EnGo 3x User Guide
Description
Use Automatic to provide an even weighting of connections across
cellular and Ethernet connections. The EnGo adjusts the overall
weighting according to network conditions to provide the requested
bitrate.
Use Cellular if your Ethernet connection is a satellite connection and you
prefer to use cellular connections instead. EnGo puts a higher priority on
the cellular connection and, if necessary, adjusts the weighting
depending on the network conditions to provide the requested bitrate.
Use Ethernet to put a higher priority on the Ethernet connection over the
cellular connection. Use this option if the Ethernet connection is a lower
cost option as part of blended connectivity. EnGo adjusts the weighting
according to the network conditions to provide the requested bitrate.
.