Idle-Up "Idlup; Idle Up At Engine Start - RadioLink RC4GS V3 Instruction Manual

Digital 5 channels proportional rc system adaptable to rc cars/boats/robot
Hide thumbs Also See for RC4GS V3:
Table of Contents

Advertisement

RadioLink Electronic Limited
www.radiolink.com
Setup item
FWRD: Forward side acceleration amount
BRAK: Brake side acceleration amount
Throttle acceleration adjustment
Enter the function menu and use "Dec(-)" or "Inc(+)" button to access ACCEL
function, then press "Enter" button to get into ACCEL function interface.
(1) Forward acceleration amount adjustment
Press "Dec(-)" or "Inc(+)" button to select "FWRD", press"Enter"key to confirm and the initial value of "FWRD"
will blink, then use "Dec(-)"or"Inc(+)" button adjust the acceleration amount.
(Note: In the interface of adjusting the value, return to the initial value "0%" by pressing "Dec(-)" and "Inc(+)"
buttons simultaneously for about 1 second.)
Press"Enter"button, the adjusted value stops blinking, now the value has been set.
"0%": No acceleration
"100%": Maximum acceleration(Approximately1/2of the forward side steering angle)
Forward acceleration amount(FWRD)
0%~100%
Initial value: 0%
(2) Brake side acceleration amount adjustment
Press "Dec(-)" or "Inc(+)" button to select " BRAK ", press"Enter"key to confirm and
the initial value of "BRAK" will blink, then use"Dec(-)"or"Inc(+)"button adjust the acceleration amount.
(Note: In the interface of adjusting the value, return to the initial value"0%" by pressing
"Dec(-)" and "Inc(+)" buttons simultaneously for about 1 second.)
Press "Enter" button, the adjusted value stops blinking, now the value has been set.
"0%": No acceleration
"100%": Maximum acceleration (Brake side maximum steering angle)
Brake side acceleration amount(BRAK)
0%~100%
Initial value: 0%
When ending setting, return to the initial screen by pressing "Exit" button twice.

2.11 Idle-Up "IDLUP"

2.11.1 Idle up at engine start

Use this function to improve the starting characteristics of the engine by
raising the idling speed when starting the engine of a gas powered car.
Idle-Up rate (RATE)
-50% ~ -1%, 0%, +1% ~ +50%
Initial value: 0%
"-": Brake side
"+": Forward side
Idle-Up "IDLUP"
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents