Table of Contents
Advertisement
On-Chip Primary/
Secondary PCI IDE
Primary
Master / Slave PIO
Secondary
Master / Slave PIO
Primary
Master / Slave UDMA
Secondary
Master / Slave UDMA
USB Controller This option allows you to decide to activate PCI Slot
USB Keyboard Sup-
USB Mouse Support S elect Enabled if your system contains a Universal
Init Display First This option allows you to decide to activate PCI Slot
AC97 Audio/Modem This option allows you to decide to enable/disable
Onboard/CNR LAN
Selection
The chipset contains a PCI IDE interface with sup-
port from two IDE channels. Select Enabled to acti-
vate the first and/or the second IDE interface. Select
Disabled to deactivate an interface if you install a pri-
mary and/or second add-on IDE interface.
The choice: Enabled (default), Disabled.
Choose Auto (default) or Mode 0~4. The BIOS will
detect the HDD mode type automatically when you
choose Auto. You need to set to a lower mode than
Auto when your hard disk becomes unstable.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3,
Ultra DMA/66 implementation is possible only if your
IDE hard drive supports it and the operating environ-
ment includes a DMA drive and your system software
both support Ultra DMA/66, select Auto to enable
BIOS support.
The choice: Auto, Disabled.
or AGP first.
The choice: PCI Slot (default), AGP.
Select Enabled if your system contains a Universal
Serial Bus (USB) controller and you have a USB
port
keyboard.
The choice: Enabled,Disabled
Serial Bus (USB) controller and you have a USB
mouse.
The choice: Enabled,Disabled
or AGP first.
The choice: PCI Slot (default), AGP.
the 815 chipset to support AC97 Audio/Modem.
The choice:Auto,Disabled
Use the default setting.
The choice:Auto,Onboard
Mode 4.
65ME/65ME+
57
Advertisement
Table of Contents
