Table of Contents
Advertisement
3. Make sure that the CPU positions in the socket tightly, and then put the
lever down to complete the CPU installation.
2-2 CPU FREQUENCY
• The CPU's "CPU CLOCK RATIO" and
tings are automatically detected to be default value by BIOS in the
"Frequency/Voltage Control" section.
• We do not suggest and assume the responsibility for any action that
changes the CPU default setting such as overclocking. Uncorrect
CLOCK RATIO and HOST/PCI CLOCK settings may cause damage
to your CPU.
2-3 MEMORY INSTALLATION
• Insert the module(s) as shown. DIMMs have 168-pins and two notches
that will match with the onboard DIMM socket.
168-Pin DIMM Notch Key Definitions(3.3V)
DRAM Key Position
Voltage Key Position
Unbuffered
"CPU HOST/PCI
3.3V
65M E / 65ME+
CLOCK" set-
15
Advertisement
Table of Contents
