Table of Contents
Advertisement
Configuration
Two 4-Wire Networks (2M4U) in Star Configuration
With this method, 3 phase voltages and the respective N conductor voltages can be
determined in two star connected three-phase systems. Two 4-wire network (2M4U)
connections are shown below.
The connections to the channels must be made as per the labels on the analog channel port
shown in Section 3.5.
Figure 6.5 - 2M4U in Star Configuration
Note
Refer to iQ+ Help for associated software settings.
84
www.qualitrolcorp.com
Advertisement
Table of Contents
