Serial Connection to Informa PMD-A
14. From the Maximum speed (bps) drop down list provided user has to select the speed
as "38400". (The default baud rate of serial port on INFORMA PMD-A device is set to
38400).
15. User has to de-select the "Enable hardware flow control".
16. Click on OK, then the below wizard appears.
Figure 5.11 – Modem Configuration
17. PC name appears in the User name by default. User has to enter any password.
18. Click on connect, then the below screens will appear.
64
www.qualitrolcorp.com