Table of Contents
Advertisement
Serial Connection to Informa PMD-A
Figure 5.14 – Status-Details
Note
User has to use Server IP address (10.38.0.2 in the above mentioned example screen) to
access the INFORMA PMD-A device via PPPD serial link.
PPPD ON MODEM:
User can enable/ use this service, when the INFORMA PMD-A device need to be accessed
via modem. User has to use Standard Modem cable type for this service.
Pre Requisites:
User has to make sure that appropriate modem drivers are installed and the
Note
modem is detected by the PC. Please refer to the CD/Manual provided by the
Modem manufacturer for driver installation instructions. Once the drivers are
installed and modem is connected to the PC, user has to follow the below
procedure to verify whether modem is detected or not.
•
Server IP address: It is the new / temporary IP address assigned
to INFORMA PMD-A device and meant only for the PPPD on
serial link.
•
Client IP address: It is the new / temporary IP address assigned
to PC and meant only for the PPPD on serial link.
•
The Server IP address & Client IP address is user configurable.
66
www.qualitrolcorp.com
Advertisement
Table of Contents
