Table of Contents
Advertisement
Configuration
Free interval histogram can be configured from 1 minute to 24 hours. Aggregation interval
should be less than the report duration. However, it should be a proper fraction of the report
duration for proper data points.
The user can configure the number of bins and their sizes. The user can also select the
minimum, maximum, or average values of the parameter for the histogram plot.
•
Configurable parameters: 3 second MMA data and 10 second frequency.
•
Output: Histogram data of all the parameters for the entire duration.
Figure 6.27 – Free Interval Histogram Report
105
www.qualitrolcorp.com
Advertisement
Table of Contents
