Table of Contents
Advertisement
14. OPERATING PROCEDURES
14.6 TARE/SAVE FUNCTION PROCEDURES
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.)
There are two kinds of tare subtraction procedures, one is "Direct tare", the other is "Preset tare". The
SAVE key is used to save the tare, unit price, and PLU data after taking a commodity from the platter.
Place a container on
the platter.
(Ex. 0.200 lb)
Press:
Enter the PLU #.
Press:
The PLU data and tare
are saved.
Place a commodity on
the platter. (Ex. 1.000 lb)
MANUAL:
Press:
Remove the commodity
together with the container.
NOTES: 1. Tare subtraction is available up to 2.000 lb. for US type, and up to 1.000kg (2.205lb) for the CA/
2. Preset tare must be a multiple of 2 g for CA/QR/AU type (Kg scale) and a multiple of 0.005 lb
3. The tare % function is available when the Initial Setting #8-7 is set to 1. The speed key #70
4. When a commodity is placed on the platter and the calculated tare exceeds the maximum, a
Get user manuals:
See SafeManuals.com
0.200 lb
T
1
0
0
PLU
SAVE
:AUTO
PRT
The label is issued.
*
C
QR/AU type. When tare subtraction is in operation, however, the scalable range for net weight
becomes less by the amount of the tare. (Net weight = Gross weight-Tare)
for US/CA type (Lb scale).
will function as the % key (Refer to page 5-3). Set a tare % within the range from 0.0 to 99.9.
"TARE WEIGH OVER" error will occur.
2
0
0
T
Place a container on
the platter
Tare %
%
1
0
0
Remove the commodity
together with the container.
%
CA type
PLU
14-11
14.6 TARE/SAVE FUNCTION PROCEDURES
Tare %
1
0
0
Press:
%
Press:
C
US type
0
Press:
T
PLU
Press:
Press:
Press:
Advertisement
Table of Contents
