11. PROGRAMMING PROCEDURES
11.5
PLU VERIFYING LABEL
PLU data stored in the scale are verified in the following procedure.
<MENU>
Group 1
NOTES:
1. Labels are printed in both batch mode and on-demand mode.
2. When no PLU is stored in the selected range, an error occurs when the ENTER key is
pressed.
3. Pressing the CLEAR key releases the scale from the error mode and returns to the initial
status of this menu.
4. After clearing a paper jam error, the scale will wait for an entry of PLU# again.
Get user manuals:
See SafeManuals.com
Menu Group: 1
Item No.:
4
g
4
1
Set the individual PLU#. (Ex. PLU #100)
1
Set the block PLU#. (Ex. PLU #100~199)
1
Set the zone PLU#. (Ex. PLU #100~108)
CLEAR
ENTER
To interrupt
To resume label issue
label issue.
which has been interrupted.
Set the entire PLU#.
0
0
NEXT
0
0
1
PLU
<MENU>
PROG.
Group 1
ESC.
<MENU>
g
11-12
11.5 PLU VERIFYING LABEL
ENTER
The
confirmation
label is issued.
0
8
Main