Lon System - TOSHIBA TEC Corporation 9000N-FFB Series Owner's Manual

11. PROGRAMMING PROCEDURES

11.14 LON SYSTEM

The SL-9000 scales which consist of a master, satellites, and a backup master are connected
each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc.
ID# 1 is reserved for the master terminal.
ID# 2 is reserved for the backup master terminal or satellite terminal.
ID# 3 to 32 are for satellite terminals.
Setting numbers other than the above results in an error.
NOTES: 1. Before starting the above procedure, press the
Get user manuals: See SafeManuals.com
Menu Group: 2
Item No.: 4
m
<MENU>
4
Group 2
Set the number of
ID#: 1
scales in the system.
PROG.
ESC.
m
2. When installing the backup master terminal, set the master scale's initial status of #9-1 to
1.
3. Set ID # to all scales connected by LON cable.
4. When the display power is turned on, a satellite terminal is ready to receive data from
the master terminal.
5. After setting the ID #, turn the power switch OFF and ON again.
CHANGE
PLU
IN-LINE OFF-LINE
ENTER
<MENU>
Group 2
Main
<MENU>
11-22
11.14 LON SYSTEM
ID #
ENTER
Yes
n
DLL?
No
p
key and enter IN-LINE mode.