TOSHIBA TEC Corporation 9000N-FFB Series Owner's Manual page 47

11. PROGRAMMING PROCEDURES
Table4 : Transmission Item List
ITEM #
2
3
4
5
6
7
8
9
10
11
12
13
14
15
NOTE: When transferring data with the PL-3, required FDK varies depending on the amount of ING.
Be careful of the following when changing a FDK.
To cancel FDK change, press the CLEAR key.
Get user manuals: See SafeManuals.com
Title on the Display
Liquid Crystal Display
VERIFY PLU & ING
READ PLU & ING
WRITE PLU TO CMT
VERIFY PLU = CMT
READ PLU FM CMT
WRITE ING TO CMT
VERIFY ING = CMT
READ ING FM CMT
WRITE NUTRITION
VERIFY NUTRITION
READ NUTRITION
WRITE SPEED KEY
VERIFY SPEED KEY
READ SPEED KEY
a: During write operation, replace the FDK with a formatted one.
b: Verify and read data in the same order as write.
Contents of Transmission
7 seg.
2 COMPARE PLU & ING. IN OLD FORMAT
3 READ PLU & ING. IN OLD FORMAT
4 SAVE PLU IN NEW FORMAT
5 COMPARE PLU IN NEW FORMAT
6 READ PLU IN NEW FORMAT
7 SAVE ING. IN NEW FORMAT
8 COMPARE ING. IN NEW FORMAT
9 READ ING. IN NEW FORMAT
10 SAVE NUTRITION IN NEW FORMAT
11 COMPARE NUTRITION IN NEW FORMAT
12 READ NUTRITION IN NEW FORMAT
13 SAVE SPEED KEY IN NEW FORMAT
14 COMPARE SPEED KEY IN NEW FORMAT
15 READ SPEED KEY IN NEW FORMAT
11-20
11.12 CMT/PL-3
CMT PL-3
: operable, : inoperable