Removal And Replacement Of Media - TOSHIBA TEC Corporation 9000N-FFB Series Owner's Manual

9. REMOVAL AND REPLACEMENT OF MEDIA

9. REMOVAL AND REPLACEMENT OF MEDIA
CAUTION: Do not hold the label cassette by the portion A. Doing so may deform the label
1. Open the right cover. Then push the head-up lever in the direction indicated by the arrow.
2. Pull out the label cassette.
3. Pull out the roll stopper and the backing paper stopper, and remove the media core with
backing paper.
NOTE: When removing the backing paper, loosen the paper by turning the paper winding shaft
Get user manuals: See SafeManuals.com
Since there is a cutter at the paper outlet, be careful not to injure your fingers when
replacing media.
cassette, causing damage when setting it in position. Please be sure to hold
the label cassette as the following figure shows.
Head-up Lever
counterclockwise.
WARNING!
A
Backing Paper
9-1
9. REMOVAL AND REPLACEMENT OF MEDIA
Label Cassette
Roll Stopper
Backing Paper Stopper