Table of Contents
Advertisement
14. OPERATING PROCEDURES
14.6 TARE/SAVE FUNCTION PROCEDURES
There are two kinds of tare subtraction procedures, one is "Direct tare", the other is "Preset tare". The
SAVE key is used to save the tare, unit price, and PLU data after taking a commodity from the platter.
Place a container on
the platter.
(Ex. 0.200 lb)
Press:
Enter the PLU #.
Press:
The PLU data and tare
are saved.
Place a commodity into
the container. (Ex. 1.000
lb)
MANUAL:
Press:
NOTES: 1. Tare subtraction is available up to 2.000 lb. for US type, and up to 1.000kg (2.205lb) for the
Get user manuals:
See SafeManuals.com
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.)
0.200 lb
T
1
0
PLU
SAVE
:AUTO
PRT
The label is issued.
*
C
Remove the commodity
together with the container.
CA/QR type. When tare subtraction is in operation, however, the scalable range for net weight
becomes less by the amount of the tare. (Net weight = Gross weight-Tare)
2. Preset tare must be a multiple of 2 g for CA/QR type (Kg scale) and a multiple of 0.005 lb for
US/CA type (Lb scale).
3. The tare % function is available when the Initial Setting #8-7 is set to 1 (SL-9000) or #28-4
is set to 1 (SL-9000N). The speed key #70 will function as the % key (Refer to page 5-3). Set
a tare % within the range from 0.0 to 99.9.
4. When a commodity is placed on the platter and the calculated tare exceeds the maximum,
a "TARE WEIGH OVER" error will occur.
2
0
0
T
0
Tare %
%
1
0
0
%
14-11
14.6 TARE/SAVE FUNCTION PROCEDURES
Tare %
1
0
Press:
%
Place a container on
the platter
Remove the commodity
together with the container.
Press:
C
CA type
US type
PLU
Press:
PLU
EM1-31064
0
0
Press:
Press:
T
Press:
Advertisement
Table of Contents
