Calling And Printing Logos - TOSHIBA TEC Corporation 9000N-FFB Series Owner's Manual

14. OPERATING PROCEDURES

14.8 CALLING AND PRINTING LOGOS

When the initial setting #10-7 is set to "1", a logo containing a picture, a mark, a POP message etc.,
can be printed on the ingredient label having 12 lines or more for printing ingredient message.
Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
NOTES:
Get user manuals: See SafeManuals.com
Press:
LOGO
Enter the logo #.
1
(1 to 26)
PRT
Press:
Start the label issue operation.
1. The logo # will be effective until it is changed or deleted.
(Logo # is still effective after turning power off and/or changing mode.)
2. Pressing the PRT/* key returns the display to the initial display of Weight mode.
This clears the unit price and tare data.
3. LOGOs will not be printed together with a safe handling instruction on a label.
4. LOGOs will be printed in the center of a label.
0
0 or C
*
14-13
14.8 CALLING AND PRINTING LOGOS
Select the LOGO type
(Normal < > F.Shopper).
Clear the entered
logo #.