Ingredient Message - TOSHIBA TEC Corporation 9000N-FFB Series Owner's Manual

11. PROGRAMMING PROCEDURES
11.3

INGREDIENT MESSAGE

Ingredient messages can be printed on a label with a maximum of 54 characters per line in small
letters or 32 characters per line in boldfaced small letters, by up to 38 lines.
NOTES:
Get user manuals: See SafeManuals.com
Menu Group: 1
Item No.: 2
C
<MENU>
2
Group 1
Enter the ingredient message
(Refer to Page 11-3.)
RECEIVE
Pressing the
calls data stored by pressing
SEND
the key.
Pressing the
SEND
temporarily stores data into
the work buffer.
1. When no data is programmed for the PLU, ingredient cannot be set.
2. When a selected PLU is not stored in the PLU file, a "PLU NOT FOUND" error occurs.
3. Once you exit this menu and enter again, data stored in the work buffer is cleared.
4. When there is no area to store ingredient data, a "MEMORY FULL" error occurs.
5. PLUs cannot share ingredient data. (PLU and ingredient data are in pairs.)
Enter the PLU#
(max. 6 dig.)
NEXT
or
PLU
ENTER
key
key
The memory file
is sorted when a
memory full error
occurs.
11-7
11.3 INGREDIENT MESSAGE
ENTER
C
PROG.
TEST
ESC.
Sorting
Y
Any key
except Y
Not Sorting
<MENU>
Group 1
Main
<MENU>