Specified Application; Product Description - KEB COMBIVERT F5 Instruction Manual

Preface
KEB , COMBIVERT
®
Automation KG.
Other wordmarks or/and logos are trademarks (™) or registered trademarks (®) of their re-
spective owners and are listed in the footnote on the first occurrence.
When creating our documents we pay attention with the utmost care to the rights of third
parties. Should we have not marked a trademark or breach a copyright, please inform us in
order to have the possibility of remedy.
1.5 Specified application
The semiconductors and components used by KEB are developed and designed for use
in industrial products. If the KEB COMBIVERT F5 is used in machines, which work under
exceptional conditions or if essential functions, life-supporting measures or an extraordinary
safety step must be fulfilled, the necessary reliability and security must be ensured by the
machine builder.
The operation of our products outside the indicated limit values of the technical data leads to
the loss of any liability claims.
Units with safety function are limited to a service life of 20 years. After this time the unit must
be replaced.
1.6

Product description

This instruction manual describes the power circuits of the following units:
Unit type:
Series:
Power range:
Housing size:
Version:
Features of the power circuits :
• only slight switching losses due to IGBT
• low noise development due to high switching frequency
• extensive safety device for current, voltage and temperature
• voltage and current monitoring in static and dynamic operation
• conditionally short circuit proof and earth-fault proof
• hardware current limit
• integrated cooling fan
8
, COMBICONTROL
®
Frequency inverter
COMBIVERT F5/F6
200...400 kW
W
Heat sink with cooling fan (standard)
Heat sink with cooling fan (through-mount version)
Water cooling (mounted version) Water cooling (through-mount version)
and COMBIVIS are registered trademarks of KEB
® ®