Set Production Code; Unit Of Measurement Selection - Ametek AMEVision 3050 Series User Manual

16 | Model 3050 Moisture Analyzers Series

Set Production Code

Use the left and/or right navigation arrows to locate the Set Production
Code menu and press the ENTER/MENU key.
Set the production code for the Dryer and Moisture Generator. Navigate
to ACCEPT and select ENTER on the keypad.
Figure 11. Set Production Code screen.

Unit of Measurement Selection

Figure 13. Unit of Measurement Selection screens.
Use the left and/or right navigation arrows to locate the Unit Selection
menu and press the ENTER/MENU key. Select the unit of measurement
for your process. Navigate to ACCEPT and press ENTER on the keyboard.
This unit will be displayed on the Process Pressure screen (Figure 8).