Main Connection Settings; Aux Connection Settings - Wiznet WizFi630 User Manual

2.5.1. Main Connection settings

2.5.2. Aux Connection Settings

© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
Downloaded from Elcodis.com electronic components distributor
Type
Enable checked : Serial to LAN is used.
Status
Enable un-check: Serial to LAN is not used.
Protocol used in Serial to LAN communication
Protocol
Serial to LAN operation mode. ( Client Mode recommended)
Mode
Server IP
Enter the IP address for WizFi630 setting.
Server Port
Enter the port number for remote serial data server host PC.
Reconnect Interval
Interval of TCP reconnection.
Connection Type of WizFi630's Serial LAN. ( TCP Only )
System Bootup : connected to the remote server upon bootup.
Connection
Serial Data In : once serial data comes in, connect to remote server.
Baud rate
Select the serial communication speed.
Databits
Select the databits.
Parity
Select the method for parity check.
Stopbits
Select the stopbits.
FlowControl Select the method for flow control. (Option: none, Xon/Xoff, RTS/CTS)
Type
Status
Select whether to enable serial port or not.
Protocol
Protocol used in Serial to LAN communication.
Mode
Select Server or Client Mode.
Server IP Enter the IP address for WizFi630 setting.
Server Port Enter the port number for remote serial data server host PC.
Description
-TCP
-UDP
- Server : waits for connection.
- Client : connected to the remote server of WizFi630
- Mixed : not recommended
(end connection after inactive time)
Description
50