2.7.4. Port Setting
© Copyright 2012 WIZnet Co., Ltd. All rights reserved.
Downloaded from
Elcodis.com
electronic components distributor
Settings about wired port. In case of Gateway Mode, WAN port is set here
In case of Gateway Mode, it is better to use the default WAN port number (Port #0)
If you are not the administrator, we do not recommend changing this.
Type
WAN Port
Select the WAN Port in case of Gateway Mode.
Port #0
Enable / Disable Port #0.
Port #1
Enable / Disable Port #1.
Port #2
Enable / Disable Port #2.
Port #3
Enable / Disable Port #3.
Port #4
Enable / Disable Port #4.
Description
60