Held Jobs May Be Lost - Lexmark W820n User Manual

Held Jobs may be
lost
What this message means:
The printer memory is too full to continue processing print jobs.
What you can do:
•
Press to clear the message and continue printing. The printer frees memory by deleting the
Go
oldest held job and continues deleting held jobs until there is enough printer memory to
process the job.
•
Press to clear the message without deleting any held jobs. The current job may not print
Stop
correctly.
•
Press to open the Job Menu and cancel the current job.
Menu
•
To avoid this error in the future:
–
Delete fonts, macros, and other data stored in printer memory.
–
Install more printer memory.
Note: The messages 37 Insufficient Memory and Held Jobs may be lost
alternate on the display.
See also:
Using the Print and Hold
Held Jobs May
Not Be Restored
What this message means:
The printer was unable to restore some or all of the confidential or held jobs on the hard disk.
Note: This message may alternate with 37 Insufficient Memory or
57 Configuration Change.
What you can do:
Press to clear the message.
Go
See also:
Using the Print and Hold
Change
function;
37 Insufficient Memory
function;
37 Insufficient
280
Memory; 57 Configuration