Page Protect; Power Saver - Lexmark W820n User Manual

Page Protect

Purpose:
To successfully print a page that may otherwise generate Complex Page errors.
Values:
Off* Prints a partial page of data if memory is insufficient to process the entire page.
On Ensures that an entire page is processed before it prints.
If, after selecting On, you still cannot print the page, you may also have to reduce the size and number
of fonts on the page, or increase the installed printer memory.
For most print jobs, you do not need to select On. When On is selected, printing may be slower.

Power Saver

Purpose:
To specify the amount of time (in minutes) the printer waits after a job is printed before it goes into a
reduced power state.
Values:
Disabled
1...240
The factory default Power Saver setting depends on your printer model and engine speed. Print the
menu settings page to determine the current Power Saver setting. When the printer is in Power Saver
mode, it is still ready to receive print jobs.
Select 1 to put the printer in Power Saver mode one minute after it finishes a print job. This uses much
less energy, but requires more warm-up time for the printer. Select 1 if your printer shares an electrical
circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. Under most circumstances, this keeps the printer
ready to print with minimum warm-up time. Select a value between 1 and 240 minutes if you want a
balance between energy consumption and a shorter warm-up period.
If the Disabled value is not available from the Power Saver menu item, see
for more information.
Disables Power Saver; the fuser remains warm and ready to print at all times.
Specifies the amount of time after a print job before the printer goes into Power Saver
mode. (Your printer may not support the entire range of values.)
230
Disabling Power Saver