32
Replacing the fuser
The fuser is one of the items in the maintenance kit. Replace it when 80 Scheduled Maintenance
appears.
Removing the old fuser
1
Turn the printer off.
2
If the envelope feeder is attached to the printer, remove it. See
envelope
feeder.
3
If a duplex unit is attached to the printer, open the duplex unit door (Door E).
a
Push up on the latch to release the door.
b
Gently lower the door to the open position.
4
Pull up on the handle to open the printer side door (Door A). Gently lower the door to the open
position.
Removing the optional
116