Chapter 26: Ordering Supplies And Maintenance Items; Ordering A Maintenance Kit - Lexmark W820n User Manual

Ordering supplies and maintenance
26
items
Note: In the U.S. or Canada, call 1-800-438-2468 for information about Lexmark
Authorized Supplies Dealers in your area. In other countries, contact the place
where you bought your printer.
You can also visit the Lexmark online store at

Ordering a maintenance kit

80 Scheduled Maintenance appears on the display after 300,000 letter-size pages have printed to
let you know it is time to replace the items in the maintenance kit: fuser, transfer roller, and pick rollers.
Replace these items at this time to maintain top performance, optimize print quality, and avoid printing
problems.
Order the appropriate maintenance kit:
Part number
12G4182
12G4183
Check the tag at the rear of the printer to determine the voltage of your printer. If 120 V is on the tag, order a
low-voltage maintenance kit. For 220 V, order a high-voltage maintenance kit.
(See Replacing the items in the maintenance kit
Ordering a print cartridge
When the 88 Toner Low message appears, you should order a new print cartridge. You can continue
to print after the 88 Toner Low message appears for a few hundred pages until the print fades or no
longer prints satisfactorily.
If Toner Alarm is set to Single or Continuous, press
Order part number 12B0090. Its average yield is 30,000 letter-size pages at 5% coverage. (See
Replacing the print cartridge
Ordering a staple cartridge
Have a supply of staple cartridges on hand before the Staples Low message appears because once
it does the stapler can only staple 40 more times.
Use part number 12L0252 to order a box of three staple cartridges. (See
cartridge for more information.)
www.lexmark.com
Type of maintenance kit
300K low-voltage maintenance kit
300K high-voltage maintenance kit
for more information.)
for more information.)
102
to order supplies.
to continue printing.
Go
Replacing a staple