Installing A Flash Memory Or Firmware Card - Lexmark W840 User Manual

Installing a flash memory or firmware card

1
Remove the system board access panel. (See Accessing the printer system board.)
2
Unpack the flash memory or firmware card.
Warning:
3
Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on
the system board.
4
Push the flash memory or firmware card firmly into place, and release the locking clips.
The entire length of the connector on the flash memory or firmware card must touch the system board and be
locked into the connector.
Be careful not to damage the connectors.
Downloaded From ManualsPrinter.com Manuals
Note: Flash memory and firmware cards designed for other Lexmark printers may not work with your printer.
Flash memory and firmware cards are easily damaged by static electricity. Touch something metal
such as the printer frame before you touch a card.
Installing a flash memory or firmware card
Installing options
29