Installing An Output Expander - Lexmark C752 Setup Manual

Installing an output expander

Note:
After you unpack the output expander, install it
immediately. Otherwise, the edges of the mounting
brackets could damage tabletops or fabrics.
Warning:
The output expander tray is designed to hold
the weight of print material only. Do not use it as a shelf;
excess weight may cause it to disengage from the output
expander.
Set up the printer and paper handling options
10
Your printer supports an optional output
expander that lets you stack up to 650
sheets of paper in one bin.
1
Unpack the output expander and
remove any packing material.
2
Remove the printer top cover.
3
Align the mounting brackets on the
bottom of the output expander with
the slots in the top of the printer.
4
Lower the output expander into
place.