Installing An Output Expander - Lexmark Optra Optra T Setup Manual

Installing an Output Expander

Tray
Labels
Bracket and bail
Warning!
The output expander tray is designed to hold the
weight of print material only. Do not use it as a shelf;
excess weight may cause it to disengage from the
output expander.
10 Install Paper Options and Printer
Optra T label
(colored triangle)
Each output expander consists of the expander
and a removable tray. A paper bail, bracket, and
labels are also included.
After you carefully unpack the output expander,
install it immediately; otherwise, the edges of the
mounting brackets could damage tabletops or fab-
rics.
1
Remove the top cover from the printer or
previously installed output option.
2
Slide the plastic bracket onto the static
brush holder, located near the bottom of the
output expander.