Lexmark Optra S1625 User Manual page 218

Caring for Your Printer
202
Solving Printer Problems
Problem Action
Entire page is Make sure the packaging material is removed from the
white. print cartridge. See "Removing the Print Cartridge
Packaging" on page 12. Check the print cartridge to be
sure it is installed correctly. See page 15 for directions.
Streaks appear on Check to see if the toner is low. Remove the cartridge.
the page.
To utilize the remaining toner, shake the cartridge
gently. Reinstall the same print cartridge. See page 15
for directions.
If you are using pre-printed forms, make sure the ink
can withstand temperatures of 212
Change the Print Darkness setting in the QUALITY
Printing is too dark.
MENU to Normal or Lighter.
Macintosh users should make sure the lines per inch
(lpi) setting is not set too high in the software appli-
cation.
Characters have • Change the Print Resolution setting in the QUALITY
jagged or uneven MENU to 600 dpi or 1200 dpi.
edges. • Turn PQET in the QUALITY MENU to On.
• If you are using downloaded fonts, verify that the
proper installation to the host computer and the fonts
are supported by the software application.
Image quality is Resolution was automatically reduced. Reduce the
poor. complexity of the job or add additional memory. See
"Res Reduced" on page 181.
o o
C (414 F).