Lexmark Optra S1625 User Manual page 120

Using Your Printer
Parallel Menu Selections (Continued)
Menu Item
Honor Init
Parallel Mode 1
Parallel Mode 2
* Factory Default
104
Using the Operator Panel and Menus
Values and Functions of the Menu Items
Off*
On
If you use a parallel interface, the Honor Init setting determines whether
the printer honors hardware initialization requests from the computer. The
computer requests initialization by activating the INIT signal on the
parallel interface. Many personal computers activate the INIT signal each
time the computer is turned on and off.
Off
On*
This setting enables or disables the pull up resistors on the parallel port
signals. It is useful for personal computers that have open collector outputs
on the parallel port signals. Set Parallel Mode 1 to On to disable the
resistors or Off to enable the resistors.
Off
On*
This setting determines if the parallel port data is sampled on the leading or
trailing edge of strobe. If Parallel Mode 2 is set On, the parallel port data is
sampled on the leading edge of strobe. The parallel port data is sampled on
the trailing edge of strobe if Parallel Mode 2 is set Off.