Lexmark Optra S1625 User Manual page 206

Caring for Your Printer
Attendance
Message
63 Unformatted
Disk
70 - 79 messages
80 Scheduled
Maintenance
81 Engine Code CRC
Failure
88 Toner Low
200 Paper Jam
Remove Cartridge
190
Understanding Printer Messages
Meaning and Required Action
The printer detects an unformatted hard disk during power on.
Note: Disk operations are not allowed until the hard disk is
formatted. Try the following:
• Format the hard disk using Format Disk in the TESTS MENU.
• Send the data again.
If the error condition remains, the hard disk is defective and must be
replaced.
Press Go to clear the message. The hard disk is ignored and normal
operation continues.
These numbered messages are reserved for internal network adapter
messages.
See the CD online document about the printer operator panel for
more information. Also, see the documentation that comes with the
internal network adapter.
The printer requires replacement of routine maintenance items to
maintain top performance, and avoid print quality and paper feed
problems. The message displays when the printer maintenance
counter determines 250,000 pages have printed. These components
are in a maintenance kit available from Lexmark.
Press Go to clear the message.
It is recommended that you have a trained servicer install the
maintenance kit components. Failure to replace the maintenance kit
items will not interrupt printer operation, but can result in unsatis-
factory performance of the printer. For more information, see
"Maintaining Your Printer" on page 247.
Microcode in the engine flash code module has failed a CRC check.
Press Go to clear the message. The microcode data is discarded and
must be re-transmitted from the host computer.
The toner supply is low.
Press Go to clear the message.
The printer detects a paper jam under the print cartridge. Open the
upper front door, remove the print cartridge, and remove the jammed
print material. Reinstall the cartridge and close the door. See "200 and
201 Paper Jam - Remove Cartridge" on page 212 for more infor-
mation.
Press Go to resume printing. The printer prints a new copy of the
page that jammed if Jam Recovery is set to On or Auto; however, the
Auto setting does not guarantee the page will print.