Lexmark Optra S1625 User Manual page 104

Using Your Printer
Setup Menu Selections (Continued)
Menu Item
Resource Save
Download Target
* Factory Default
88
Using the Operator Panel and Menus
Values and Functions of the Menu Items
Off*
On
The Resource Save setting determines what the printer does with
downloaded resources, such as fonts and macros, if it receives a job that
requires more memory than is available.
If Resource Save is On, the printer retains all permanent downloaded
resources, such as fonts and macros, for all printer languages during
language changes and printer resets. If the printer runs out of memory, 38
Memory Full appears on the display.
If Resource Save is Off, the printer retains permanent downloaded
resources only until memory is needed. Then it deletes those resources
stored for the inactive printer language.
RAM*
Flash
Disk
The Download Target menu item does not display if the installed Flash
Memory Option or Hard Disk with Adapter Option are defective or Read/
Write or Write protected. 51 Defective Flash or 61 Defective Disk
displays during printer power on. See 51 Defective Flash on page 186 or
61 Defective Disk on page 189 for more information.
Also, Disk is not displayed for Download Target if Job Buffer Size is set
to 100%.
If the options are not installed, the menu item is not displayed and all
downloaded resources, such as fonts and macros, are automatically stored
in printer memory (RAM).
The Download Target menu item specifies the storage location for
downloaded resources.
Storing downloaded resources in flash memory or hard disk is permanent
storage rather than the temporary storage that RAM provides. You can add
resources to flash memory or to the hard disk until the option is full. Use
your software application or the printer Toolkit to download resources to
the printer.