Lexmark Optra S1625 User Manual page 197

Status Message
Res Reduced
Resetting the
Printer
Restoring Factory
Defaults
Waiting
Canceling Job
Meaning and Actions Allowed While Message is Displayed
The resolution of the page is reduced from 600 dots per inch (dpi) to
300 dpi to prevent a 38 Memory Full error. 1200 dpi pages do not
undergo resolution reduction. If a 1200 dpi print job runs out of
memory, a 38 Memory Full error occurs. Res Reduced displays for
the duration of the current job.
The printer is deleting any print jobs in process and restoring all
printer settings to user defaults.
No button actions are possible while this message is displayed.
The printer is restoring factory defaults. See page 79 for details about
which printer settings are affected.
No button actions are possible while this message is displayed.
The printer has received a page of data to print, but is Waiting until
an End of Job or Form Feed command occurs or until additional data
is received.
The display shows the printer language on line 1 to the right of
Waiting.
• To cancel the current job, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Cancel Job is on the
second line. Press Select.
• To reset the printer, press Menu> or <Menu. The Job Menu is
displayed. Press Menu> or <Menu until Reset Printer is on the
second line. Press Select.
• To print the contents of the print buffer, press Go, Menu>, or
<Menu. The JOB MENU displays. Press Menu> or <Menu until
Print Buffer is on the second line. Press Select. See Print Buffer in
JOB MENU on page 82 for more information.
• Press Stop to take the printer out of Waiting. The Not Ready
message is displayed. Press Go to return to Waiting.
The printer is processing a request to cancel the current print job.
Caring for Your Printer
Understanding Printer Messages
181