Lexmark Optra S1625 User Manual page 128

Using Your Printer
Network Menu Selections (Continued)
Menu Item
Network Buffer
Job Buffering
NETWORK x
SETUP
* Factory Default
112
Using the Operator Panel and Menus
Values and Functions of the Menu Items
Auto*
3K to maximum size allowed
Your printer has a variable buffer size that can be changed from the
operator panel. You can configure the size of the input port buffers to meet
your system needs. The maximum size available for modification depends
on the amount of memory in your printer, the size of the other link buffers,
and if the Resource Save setting is On or Off. To maximize the range for
the Network buffer size for any of the three network buffers, you can
disable or reduce the size of the parallel, serial, Infrared, Fax, and LocalTalk
buffers. The Auto setting indicates the printer selects the buffer size based
on the total memory available.
Changing the Network Buffer setting automatically resets the printer.
Off*
On
The Job Buffering menu item does not display if the formatted hard disk
is defective, is Read/Write or Write protected, or if the Job Buffer Size is set
to Disabled. 61 Defective Disk displays during printer power on. See 61
Defective Disk on page 189 for more information. Also, see Job Buffer Size
on page 93.
Job buffering lets you delay processing of a print job. The job is temporarily
stored on an optional hard disk before being printed. This usually frees the
host computer during the actual printing of a print job.
If Job Buffering is set On, print jobs are buffered to the hard disk. If Job
Buffering is set Off, the print jobs are not buffered.
Changing the Job Buffering setting automatically resets the printer.
Values for this menu item are supplied by the network card. Access the
menu to see the values.
x represents the connector in which the card is attached.
Refer to the documentation that came with your network option.