Installing An Optional Card - Lexmark Optra Optra T Setup Manual

Installing an Optional Card

MarkNet internal
print server
Tri-Port
interface
Warning!
Electronic components are easily damaged by static
electricity. Touch something metal on the printer before you
touch the card.
Connector 1
Connector 2
Parallel/USB
interface
Hard disk
with adapter
A number of cards are available for your printer.
Refer to the documentation that is included with
each card for detailed information about that spe-
cific card.
Your printer will accommodate one or two cards,
depending on the model. The installation instruc-
tions are the same for each type of card.
1
Before you install the card, follow the steps
under "Accessing the Printer System Board"
beginning on page 15.
2
Locate the card connectors on the system
board. If you are installing only one card,
install it in connector 1. If you are installing
two cards on a model with multiple
connectors, use connector 1 first and then
connector 2.
3
Locate the two screws on the back of the
printer that attach the metal plate to the slot.
4
Remove and save the two screws. Remove
and discard the plate.
5
Unpack the card. Save the packaging
materials.
Install Memory and Optional Cards 17