Turning On The Printer; Attaching The Operator Panel Overlay - Lexmark Optra Optra T Setup Manual

Optra t series

Hide thumbs Also See for Optra Optra T:

Table of Contents

Enlarged version

Operator panel overlay

Turning on the printer

Plug the printer power cord into the connec-

tor as shown.

Plug the other end of the printer power cord

into a properly grounded electrical outlet.

Turn the printer power on.

If an error message displays, refer to the

troubleshooting section of the User's Guide,

available on the Optra T Publications CD.

If English is not your preferred language, an over-

lay with translated names for the operator panel

buttons is included with the printer.

Peel the protective backing off the overlay.

Align the holes in the overlay with the

buttons on the operator panel and press it

into place.

Rub the overlay firmly to make sure it

adheres securely to the operator panel.

Peel the protective covering away from the

overlay.

Attach Cables

Table of Contents

Do you have a question about the Optra Optra T and is the answer not in the manual?