Volvo Penta D4 Operator's Manual page 34

Starting
32
Starting the Engine
Shifting, adjusting speed and performing EVC settings
and calibrations is only possible at an active station.
On a boat with one station the station is always active.
On a boat with two or more stations the main station
automatically becomes active when the EVC system
is started up with the ignition key(s). If the engine(s) is/
are started from another station this station automati-
cally becomes active instead.
Put the reverse gear in neutral
Put the reverse gear in neutral by moving the control
lever(s) to neutral at all stations.
Two lever control: Also check that the engine speed
lever is in the idling position.
Turn the ignition on
Turn the starter key to position I to switch the ignition
on.
Check the tachometer display
If a fault is registered it will be shown in the tachometer
display, please refer to Fault Handling page 42 for
further information and recomended actions.
7748934 04-2008