Volvo Penta D4 Operator's Manual page 19

4000
2000
P0002420
Single installation
P0002421
Twin installation
SETTINGS
LANGUAGE
BLEEP
ENGINE
DISPLAY
P0002408
7748934 04-2008
ENGLISH
OFF
PORT
BACK
Graph, button 4
The information is shown as graphs. Press button 4
repeatedly to choose which information will be shown.
The time interval is set in the Configuration menu.
If the connection is broken there will be a straight line
in the display.
In a twin installation the port engine is shown as a black
line and the starboard engine as a grey line.
Configuration menu
Press button 5 for five seconds to enter the Configu-
ration menu. Navigate with the up and down arrows,
select with the right arrow.
NOTICE! The port engine, or both engines, must have
the ignition on when display settings are made.
System information
System information shows the EVC-menyn and is han-
dled by the knob on the control panel. For more infor-
mation, see Instruments and Controls page 19.
Settings
- Language: Setting of what language the informa-
tion is to be presented in are made in the EVC menu,
see Instruments and Controls page 19.
- Bleep: On/Off, setting if pressing the instrument
buttons will be followed by a beep or not.
- Engine: Setting of what kind of installation the dis-
play is a part of and which engine is to be shown in
the display.
Instruments and Controls
17