Raster Image Graphics; Raster Compression Mode - Lexmark C752 Technical Reference

Raster Image Graphics

These commands utilize the raster area. Before sending data, set the presentation
mode, the resolution, the compression mode, the raster height and width, and start
raster graphics. These parameters are in effect until you overwrite them with a different
command or there is a printer reset.
To ensure that the printed image appears in the expected area, set width and height
parameters.

Raster Compression Mode

The Raster Compression Mode command determines how raster data is coded. It
affects the amount of code required to create an image, and the efficiency of image
printing.
Syntax:
ESC
*b#M
Parameters:
0
1
2
3
5
9
999
1002
1003
1004
1005
1006
1007
1008
Uncoded (default)
Run-Length Encoded
Tagged Image File Format (TIFF) Byte
Delta Row
Adaptive Compression
Replacement Delta Row
Zlib
Group 4
Group 3 one dimensional
Group 3 two dimensional K=2
Group 3 two dimensional K=4
TIFF word (16 bit)
TIFF double-word (32 bit)
Adaptive Compression (includes TIFF word and TIFF double-word)
2-66
PCL