Hisense 65WR6CE User Manual page 21

Connect to external audio device
Digital audio output: connect to power amplifier via coaxial port, then connect power amplifer to
speaker.
Device port
Connect to DP interface device
Device port
NOTE
The supported signal formats of the DP port refer to Chapter 8 Appendix.
Part of lower version DP cables may cause screen flashing or no displaying, please try to use
cables in latest version and high quality.
Part of input RGB signals may occur low quality situations in low or high brightness mode. To
adapt the picture quality, you can press the
Dynamic Range in the Picture menu, and then select All.
Connect to HDMI input
Connect the HDMI input connector of the device to the HDMI output port of an external device.
Device port
NOTE
The supported signal formats of the HDMI port refer to Specifications.
Connect to HDMI output
Connect the HDMI output connector of the device to the HDMI input port of an external device.
Device port
NOTE
When using it as a screen monitor, carefully read precautions for still image of the device.
Making Connections
Power amplifier
Coaxial port
Connect power amplifier to speaker
Settings button on the remote control, select
Set-top box/player/PC/DVD
18
Speaker
PC
HDMI
HDMI out
VCR/Screen monitor
HDMI
HDMI in
WR6CE User Manual