Function Keys - Atlas Copco ZR 110 Instruction Book

5.3

Function keys

Control panel
Function keys
The keys (1) are used:
• To manually load/unload the compressor (not for VSD compressors)
• To call up or to program settings
• To reset a motor overload, shut-down or service message, or an emergency stop
• To access all data collected by the regulator
The functions of the keys vary depending on the displayed menu. The actual function is indicated just
above the relevant key. The most common functions are listed below:
Designation
"Add"
"Back"
"Cancel"
"Delete"
"Help"
"Limits"
"Load"
"Mainscreen"
"Menu"
"Menu"
"Modify"
"Program"
"Reset"
"Return"
"Unload"
"Extra"
80
Function
To add compressor start/stop commands (day/hour)
To return to a previously shown option or menu
To cancel a programmed setting when programming parameters
To delete compressor start/stop commands
To find the Atlas Copco internet address
To show limits for a programmable setting
To load the compressor manually
To return from a menu to the main screen
Starting from the main screen, to have access to the submenus
Starting from a submenu, to return to a previous menu
To modify programmable settings
To program modified settings
To reset a timer or message
To return to a previously shown option or menu
To unload the compressor manually
To find the module configuration of the regulator
Instruction book
2920 1815 04