Function Keys - Atlas Copco ZR 110 Instruction Book

Instruction book
3.3

Function keys

Control panel
Function keys
The keys (1) are used:
• To manually load/unload the compressor
• To call up or to program settings
• To reset a motor overload, shut-down or service message, or an emergency stop
• To have access to all data collected by the regulator
The functions of the keys vary depending on the displayed menu. The actual function is indicated just
above the relevant key. The most common functions are listed below:
Designation
Add
Cancel
Delete
Limits
List
Load
Main Screen
Menu
Modify
Show More
Program
Reset
Return
Select
Unload
2920 1815 04
Function
To add compressor start/stop commands (day/hour)
To cancel a programmed setting when programming parameters
To delete compressor start/stop commands
To show limits for a programmable setting
To list programmed start/stop commands (day/hour)
To load the compressor manually
To return from a menu to the main display
• Starting from the main display, to initiate the main menu which gives access to
submenus
• Starting from a submenu, to return to the main menu
To modify programmable settings
To have a quick look at the compressor status
To program modified settings
To reset a timer or message
To return to a previously shown option or menu
To select a submenu or to read more details of a selection shown on the display
To unload the compressor manually
47