Digital Output Contacts - Atlas Copco ZR 110 Instruction Book

Instruction book
6.3

Digital output contacts

Warning
Connections for external equipment
The Elektronikon (Mk5) always comes with expansion module IO2 that has a number of digital output
contacts which can be used to connect external equipment.
Depending on the optional equipment, extra expansion modules are added to the machine configuration
(IO2, IO34).
The digital output contacts have following specifications:
Relay
K01
K02
2920 1815 04
Voltage-free outputs may only be used to control or monitor functional systems.
They should NOT be used to control, switch or interrupt safety related circuits.
Stop the compressor and switch off the supply before connecting external equipment.
Check the Safety precautions.
Expansion Module IO2 for Elektronikon (Mk5)
Connector
3 X 31
3 X 31
Maximum load
15 A / 250 V AC
15 A / 30 V DC
RC* protected
15 A / 250 V AC
15 A / 30 V DC
RC* protected
115