Smartbox And Smartlink - Atlas Copco ZR 110 Instruction Book

Instruction book
Reference
7a, 7b, 7c, 7d
8
9
10
11
12
13
14
15
16
17
18
19
20
To allow low load operation (load rate < 40%), a low load compensator is required during compressor
unload. The compensator keeps the pressure dew point (PDP) steady by purging a small amount of heated,
dried air through the dryer rotor (4).
2.9

SMARTBOX and SMARTLINK

General
The machine comes with a SMARTBOX mounted in the electrical cabinet.
The SMARTBOX allows read-out of a number of parameters of the machine on a user login-protected web
site called SMARTLINK. The connected antenna is mounted on the outside of the machine.
Safety precautions
It is important to follow all regulations regarding the use of radio equipment, in particular regarding the
possibility of radio frequency (RF) interference. Please follow the safety advice given below carefully.
• Respect restrictions on the use of radio equipment in fuel depots, chemical plants or other explosive
environments.
2920 1815 04
Name
Solenoid valve
Nozzle of dryer inlet
Water separator
Silencer
Safety valve
Compressed air from compressor
Regeneration air from compressor
Symbol
Explanation
Air flow
Air flow direction
No air flow
Drain
Cooling water
41