Setting Auto Answer To On; Using Caller Id From The Control Panel - Lexmark X6570 User Manual

10
Press or repeatedly until Always appears.
11
Press to save and exit.
Your faxes will now print on both sides of the paper.

Setting Auto Answer to On

1
From the Finder desktop, double-click the Lexmark 6500 Series folder.
2
Double-click the Lexmark 6500 Series Fax Setup Utility icon.
3
From the Fax Setup Utility dialog, click the Receive tab.
4
From the Auto Answer pop-up menu, choose On.
5
Click Save Settings.
The Auto Answer light on the control panel comes on. When the number of rings you set is detected, the printer
automatically receives the incoming fax.

Using Caller ID from the control panel

Caller ID is a service provided by some telephone companies that identifies the telephone number or the name of
the person who is calling. If you subscribe to this service, it works with the printer. When you receive a fax, the
telephone number or name of the person who is sending you the fax appears on the display.
Notes:
•
Caller ID is available only in some countries and regions.
•
The number of patterns is defined by the country or region setting and only the number of patterns defined for
the selected country or region is shown.
The printer supports two distinct Caller ID patterns: Pattern 1 (FSK) and Pattern 2 (DTMF). Depending on the country
or region you live in and the telecommunications company you subscribe to, you may need to switch the pattern to
display Caller ID information.
1
From the control panel, press Settings.
2
Press or repeatedly until Device Setup appears.
3
Press .
4
Press or repeatedly until Caller ID Pattern appears.
5
Press .
6
Press or repeatedly until the setting you want appears.
7
Press to save the setting.
Faxing
76